Go Back   DisplayLink Forum > DisplayLink Graphics Technology > Mac Software

Reply
 
Thread Tools Search this Thread Display Modes
Old 10-04-2012, 09:34 AM   #21
andynormancx
Junior Member
 
Join Date: Aug 2012
Posts: 9
Default

Quote:
Originally Posted by GodwinC View Post
I think the key is if using Displaylink.. don't ever let the machine goes to screen saver / power save..
When my DisplayLink driver is causing problems there is no screen saver or power save involved. It can sometimes be in its broken state immediately after booting for the first time after installing it.
andynormancx is offline   Reply With Quote
Old 10-04-2012, 06:15 PM   #22
GodwinC
Junior Member
 
Join Date: Feb 2012
Posts: 25
Default

In that case, make sure DMProxy is loading correctly when you plug it in.. it should say something like, I also find some microUSB cables are junk:

Code:
2012-10-04 10:06:20.214 AM WindowServer[80]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
2012-10-04 10:06:20.270 AM WindowServer[80]: Display 0x04273740: MappedDisplay Unit 0; ColorProfile { 2, "iMac"}; TransferTable (256, 3)
2012-10-04 10:06:20.271 AM WindowServer[80]: Display 0x2b34488d: MappedDisplay Unit 1; ColorProfile { 3, "DELL U2212HM"}; TransferFormula (1.000000, 1.000000, 1.000000)
2012-10-04 10:06:20.272 AM WindowServer[80]: Display 0x04273740: MappedDisplay Unit 0; ColorProfile { 2, "iMac"}; TransferTable (256, 3)
2012-10-04 10:06:20.272 AM WindowServer[80]: Display 0x2b38400f: MappedDisplay Unit 3; ColorProfile { 4, "DELL 2005FPW"}; TransferFormula (1.000000, 1.000000, 1.000000)
2012-10-04 10:06:20.273 AM WindowServer[80]: Display 0x2b34488d: MappedDisplay Unit 1; ColorProfile { 3, "DELL U2212HM"}; TransferFormula (1.000000, 1.000000, 1.000000)
2012-10-04 10:06:20.274 AM WindowServer[80]: Display 0x2b38400f: MappedDisplay Unit 3; ColorProfile { 4, "DELL 2005FPW"}; TransferFormula (1.000000, 1.000000, 1.000000)
2012-10-04 10:06:20.275 AM WindowServer[80]: Display 0x04273740: MappedDisplay Unit 0; ColorProfile { 2, "iMac"}; TransferTable (256, 3)
2012-10-04 10:06:20.276 AM WindowServer[80]: Display 0x2b34488d: MappedDisplay Unit 1; ColorProfile { 3, "DELL U2212HM"}; TransferFormula (1.000000, 1.000000, 1.000000)
2012-10-04 10:06:20.276 AM WindowServer[80]: Display 0x2b38400f: MappedDisplay Unit 3; ColorProfile { 4, "DELL 2005FPW"}; TransferFormula (1.000000, 1.000000, 1.000000)
2012-10-04 10:06:20.334 AM WindowServer[80]: Display 0x04273740: MappedDisplay Unit 0; ColorProfile { 2, "iMac"}; TransferTable (256, 3)
2012-10-04 10:06:20.334 AM WindowServer[80]: Display 0x04273740: MappedDisplay Unit 0; ColorProfile { 2, "iMac"}; TransferTable (256, 3)
2012-10-04 10:06:20.335 AM WindowServer[80]: Display 0x04273740: MappedDisplay Unit 0; ColorProfile { 2, "iMac"}; TransferTable (256, 3)
2012-10-04 10:06:20.335 AM WindowServer[80]: Display 0x2b34488d: MappedDisplay Unit 1; ColorProfile { 3, "DELL U2212HM"}; TransferFormula (1.000000, 1.000000, 1.000000)
2012-10-04 10:06:20.336 AM WindowServer[80]: Display 0x2b34488d: MappedDisplay Unit 1; ColorProfile { 3, "DELL U2212HM"}; TransferFormula (1.000000, 1.000000, 1.000000)
2012-10-04 10:06:20.336 AM WindowServer[80]: Display 0x2b34488d: MappedDisplay Unit 1; ColorProfile { 3, "DELL U2212HM"}; TransferFormula (1.000000, 1.000000, 1.000000)
2012-10-04 10:06:20.337 AM WindowServer[80]: Display 0x2b38400f: MappedDisplay Unit 3; ColorProfile { 4, "DELL 2005FPW"}; TransferFormula (1.000000, 1.000000, 1.000000)
2012-10-04 10:06:20.337 AM WindowServer[80]: Display 0x2b38400f: MappedDisplay Unit 3; ColorProfile { 4, "DELL 2005FPW"}; TransferFormula (1.000000, 1.000000, 1.000000)
2012-10-04 10:06:20.338 AM WindowServer[80]: Display 0x2b38400f: MappedDisplay Unit 3; ColorProfile { 4, "DELL 2005FPW"}; TransferFormula (1.000000, 1.000000, 1.000000)
Quote:
Originally Posted by andynormancx View Post
When my DisplayLink driver is causing problems there is no screen saver or power save involved. It can sometimes be in its broken state immediately after booting for the first time after installing it.
GodwinC is offline   Reply With Quote
Old 10-05-2012, 04:38 PM   #23
cmwade77
Member
 
Join Date: Sep 2012
Posts: 41
Default

Quote:
Originally Posted by GodwinC View Post
I think the key is if using Displaylink.. don't ever let the machine goes to screen saver / power save..
Mine had gone to power save just fine all the time using the work around I posted earlier, but did not always work on boot, which is why we have gone over to the J5 Create devices with Mountain Lion systems for now, we have two other systems that we want to upgrade, but are trying to wait for the DisplayLink drivers.

3 Months will not work for our time frame that we want to upgrade within, ideally we would like to have this done by the end of next week, which means we need time to test the drivers on one system today or Monday, at the latest.

Last edited by cmwade77; 10-05-2012 at 04:49 PM.
cmwade77 is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 06:27 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.