Gigabit Ethernet?!

jewfrey22 · 10-08-2014, 07:08 PM

Hi, using a Toshiba Dynadock U3.0 with DL 7.7.57957 ... I noticed that my dynadock ethernet maxes out at 100.0 mbps even though the dock supposedly has "gigabit" ethernet ... I have connected directly to my router and achieve a 1.0 Gbps connection.... but not with the dock. Is there something wrong with the software or perhaps a hardware issue? I don't see why the gigabit ethernet isn't providing a gigabit connection.

Support files attached.

parki · 11-05-2014, 10:14 PM

Hi there,

any updates on this? I have exactly the same issue: even though my local wired network is Gigabit, I can only connect at 100meg.

Wim · 11-06-2014, 12:33 AM

The connection is gigabit and will auto negotiate to gigabit. If it is not, then it could be the cable (if it does not have all 4 pairs connected), the speed has been fixed in the Advanced Ethernet settings for the adapter or it could be a hardware fault.

Wim

krogalsky · 11-07-2014, 07:48 PM

I am having similar issue, but my connection is MUCH slower. I'm using the dock with the latest firmware update and using the USB 3.0 cable that came with the unit. If I take the Ethernet cable and plug directly into my computer I can get 60 MegBPS download, but if I plug it into the dock I can't get much over 9 MegBPS. I've posted about this several times with no response. Hopefully we can get some help on this.

parki · 11-09-2014, 10:15 PM

Am now at a new desk: new cable, port etc... still only getting 100 meg. Sigh.

Wim · 11-10-2014, 02:58 PM

I've looked at the logs from jewfrey22, and these show that the the Ethernet port is auto-negotiating to 100Mbit. The software or driver has nothing to do with the autoneg and just reads the autoneg value returned by the hardware, so I suspect this is a hardware fault.

If we really could not autoneg to 1Gbps, there would be more posts about the problem.

Wim

11-07-2014, 07:48 PM	#4
krogalsky Junior Member Join Date: Sep 2014 Posts: 4	I am having similar issue, but my connection is MUCH slower. I'm using the dock with the latest firmware update and using the USB 3.0 cable that came with the unit. If I take the Ethernet cable and plug directly into my computer I can get 60 MegBPS download, but if I plug it into the dock I can't get much over 9 MegBPS. I've posted about this several times with no response. Hopefully we can get some help on this. Last edited by krogalsky; 11-07-2014 at 08:02 PM.

11-05-2014, 10:14 PM	#2
parki Junior Member Join Date: Nov 2014 Posts: 4	Hi there, any updates on this? I have exactly the same issue: even though my local wired network is Gigabit, I can only connect at 100meg.

11-06-2014, 12:33 AM	#3
Wim Senior Member Join Date: Feb 2009 Posts: 1,561	The connection is gigabit and will auto negotiate to gigabit. If it is not, then it could be the cable (if it does not have all 4 pairs connected), the speed has been fixed in the Advanced Ethernet settings for the adapter or it could be a hardware fault. Wim

11-09-2014, 10:15 PM	#5
parki Junior Member Join Date: Nov 2014 Posts: 4	Am now at a new desk: new cable, port etc... still only getting 100 meg. Sigh.

11-10-2014, 02:58 PM	#6
Wim Senior Member Join Date: Feb 2009 Posts: 1,561	I've looked at the logs from jewfrey22, and these show that the the Ethernet port is auto-negotiating to 100Mbit. The software or driver has nothing to do with the autoneg and just reads the autoneg value returned by the hardware, so I suspect this is a hardware fault. If we really could not autoneg to 1Gbps, there would be more posts about the problem. Wim