|
06-01-2012, 12:44 PM
|
#1 |
|
Junior Member
Join Date: Jun 2012
Posts: 4
|
BSOD when changing windows
Purchased one of these USB gizmos after seeing them being used (successfully) by other members of my local Flight Sim Group...
Installed OK after downloading the latest driver from your site (DisplayLink-6.3MO.exe; file version 6.3.38392.0). I am using a new Acer Aspire i7 laptop with W7-64bit, 6Gb RAM, nVidia GT540M/1Gb graphics - this screen for displaying cockpit instruments... A 19" monitor attached to the laptop video-out 15-pin socket - for displaying Flight Simulator FSX scenery... A 17" monitor attached to the USB DisplayLink adapter - for displaying moving map... Everything set up through W7 preferences - so far, so good. When changing anything on the 19" monitor/window the entire system falls to BSOD and then shuts down  Any suggestions, please  Is there an established protocol for activating/opening the screens
|
|
|
|
06-06-2012, 08:06 AM
|
#2 |
|
Junior Member
Join Date: Jun 2012
Posts: 4
|
Sorted?
Issue resolved (?) ......
Discovered that if I get everything set up and ready to go - THEN - hot-plug the USB device the "USB-screen" stays active  But I don't think it should be like this...... Whatever...
__________________
Old enough to know better... ...Young enough to do most of it again 
|
|
|
|
|
06-07-2012, 01:49 PM
|
#3 |
|
Senior Member
Join Date: Feb 2009
Posts: 1,561
|
It shouldn't BSOD like that. Can you post the logs with the blue screen dmp files so we can see what the cause is:
http://kb.displaylink.com/269 Wim |
|
|
|
|
06-12-2012, 08:15 AM
|
#4 | |
|
Junior Member
Join Date: Jun 2012
Posts: 4
|
Quote:
Tell me where they are (?) and I will copy and send to you - the laptop is not connected to the internet and I will need to send from "this" PC.... Ken 
__________________
Old enough to know better... ...Young enough to do most of it again
|
|
|
|
|
|
06-12-2012, 01:07 PM
|
#5 |
|
Senior Member
Join Date: Feb 2009
Posts: 1,561
|
The dmp files are in c:\windows\minidump\*.dmp
The other useful file will be the system details.txt, which is created by the debug tool. Wim |
|
|
|
|
06-12-2012, 02:51 PM
|
#6 | |
|
Junior Member
Join Date: Jun 2012
Posts: 4
|
Quote:
Murphy strikes again  Set up the laptop and the two screens..... All working perfectly At least I know what to look for if it happens again..... Ken
__________________
Old enough to know better... ...Young enough to do most of it again
|
|
|
|
|
 |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Linear Mode
