Dell E6530 blinks once in awhile

iampedro · 10-30-2013, 04:35 PM

If I Detach the Plugable USB 3.0 to HDMI / DVI Adapter for Windows, Multiple Monitors up to 2048x1152 / 1920x1200 Each (DisplayLink DL-3500 Chipset)

Then yes it stops.

I have the Plugable UGA-3000 USB 3.0 to VGA / DVI / HDMI Adapter for Windows - Multiple Monitors up to 2048x1152 / 1920x1080 Each (DisplayLink DL-3100 Chipset)
at home and it didn't blink all day just the device above.

I purchased the Plugable USB 3.0 to HDMI / DVI Adapter for Windows on May 26 of this year and only after upgrading to Windows 8 I started having problems.

iampedro · 10-30-2013, 08:31 PM

Also as a side note anything on the plugable screen get's moved over to the main screen when the monitors blink on and off.

Wim · 10-31-2013, 09:18 AM

It sounds like the device is dropping off the USB bus. Does it disappear from device manager when this happens?

If so, it sounds like the device is not getting enough power off the USB bus. Is it connected to an externally powered USB hub or directly to the PC?

Wim

iampedro · 10-31-2013, 11:10 AM

It is connected to the dock.

Wim · 11-01-2013, 12:27 PM

Did you confirm the device is dropping off the USB bus when the screens blank?

iampedro · 11-01-2013, 12:29 PM

I am getting my power supply and docking station replaced today under warranty to verify that that isn't part of the problem.

How would I verify the device is dropping off the USB bus when the screens blank?

Wim · 11-01-2013, 02:00 PM

Does it disappear from device manager when the screens blank?

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

10-30-2013, 04:35 PM	#1
iampedro Junior Member Join Date: Oct 2013 Posts: 13	If I Detach the Plugable USB 3.0 to HDMI / DVI Adapter for Windows, Multiple Monitors up to 2048x1152 / 1920x1200 Each (DisplayLink DL-3500 Chipset) Then yes it stops. I have the Plugable UGA-3000 USB 3.0 to VGA / DVI / HDMI Adapter for Windows - Multiple Monitors up to 2048x1152 / 1920x1080 Each (DisplayLink DL-3100 Chipset) at home and it didn't blink all day just the device above. I purchased the Plugable USB 3.0 to HDMI / DVI Adapter for Windows on May 26 of this year and only after upgrading to Windows 8 I started having problems.

10-30-2013, 08:31 PM	#2
iampedro Junior Member Join Date: Oct 2013 Posts: 13	Also as a side note anything on the plugable screen get's moved over to the main screen when the monitors blink on and off.

10-31-2013, 09:18 AM	#3
Wim Senior Member Join Date: Feb 2009 Posts: 1,561	It sounds like the device is dropping off the USB bus. Does it disappear from device manager when this happens? If so, it sounds like the device is not getting enough power off the USB bus. Is it connected to an externally powered USB hub or directly to the PC? Wim

10-31-2013, 11:10 AM	#4
iampedro Junior Member Join Date: Oct 2013 Posts: 13	It is connected to the dock.

11-01-2013, 12:27 PM	#5
Wim Senior Member Join Date: Feb 2009 Posts: 1,561	Did you confirm the device is dropping off the USB bus when the screens blank?

11-01-2013, 12:29 PM	#6
iampedro Junior Member Join Date: Oct 2013 Posts: 13	I am getting my power supply and docking station replaced today under warranty to verify that that isn't part of the problem. How would I verify the device is dropping off the USB bus when the screens blank?

11-01-2013, 02:00 PM	#7
Wim Senior Member Join Date: Feb 2009 Posts: 1,561	Does it disappear from device manager when the screens blank?