AOC e1659Fwu bad compatiblity with Windows 8.1

JamesH · 06-03-2014, 03:25 PM

Hi,

I looks like the firmware upgrade is not working.

To upgrade the firmware in your monitor please connect it to a PC with a non Haswell chipset with the latest DisplayLink software installed (Intel Core iX-3xxx and lower / any AMD chipset).

After doing this you can then reconnect to your current Haswell system.

Thanks,
James

JamesH · 06-03-2014, 04:02 PM

Quote:

Originally Posted by JamesH

Hi,

I looks like the firmware upgrade is not working.

To upgrade the firmware in your monitor please connect it to a PC with a non Haswell chipset with the latest DisplayLink software installed (Intel Core iX-3xxx and lower / any AMD chipset).

After doing this you can then reconnect to your current Haswell system.

Thanks,
James

Hi,

Alternatively, connected using USB 2.0 (a USB 2.0 cable or through a USB hub) to your Haswell PC which then should successfully upgrade the firmware.

Thanks,
James

rowenalaw · 06-04-2014, 05:16 PM

I don't have other PC. I can't borrow from others, how can I do with my own PC??

JamesH · 06-05-2014, 09:01 AM

Hi,

A USB 2.0 cable connected between your monitor and your Haswell PC will also do the trick.

Thanks,
James

rowenalaw · 06-05-2014, 03:36 PM

Thanks for your big help, but sorry that I try to use usb 2.0 cable and it still not work. I unstall the 7.6 M0 and then install 7.4 version, it work for a few seconds and then the screen turn black when I move the mouse. how can I fix it? Is there any update version of displaylink software can fix the problem? For more information, I am using Gigabyte BRIXs PC, GB-BXi7H-4500

rowenalaw · 06-07-2014, 04:53 PM

hey, could you answer me how can I make my monitor work???

Michael FINGIER · 11-26-2014, 09:36 AM

Hello,

I have also a trooble with my AOC USB Monitor also, but it look like the driver is not installing.

Thanks for the help

thefalcon · 12-01-2014, 02:56 AM

Quote:

Originally Posted by JamesH

Hi,

Alternatively, connected using USB 2.0 (a USB 2.0 cable or through a USB hub) to your Haswell PC which then should successfully upgrade the firmware.

Thanks,
James

how can we check the firmware version of the monitor? and what version is the one compatible with haswell?

06-04-2014, 05:16 PM	#3
rowenalaw Junior Member Join Date: Jun 2014 Posts: 5	sorry i don't have other pc I don't have other PC. I can't borrow from others, how can I do with my own PC??

06-05-2014, 03:36 PM	#5
rowenalaw Junior Member Join Date: Jun 2014 Posts: 5	Sorry, it still not working with usb 2.0 cable Thanks for your big help, but sorry that I try to use usb 2.0 cable and it still not work. I unstall the 7.6 M0 and then install 7.4 version, it work for a few seconds and then the screen turn black when I move the mouse. how can I fix it? Is there any update version of displaylink software can fix the problem? For more information, I am using Gigabyte BRIXs PC, GB-BXi7H-4500 Last edited by rowenalaw; 06-05-2014 at 03:45 PM.

06-07-2014, 04:53 PM	#6
rowenalaw Junior Member Join Date: Jun 2014 Posts: 5	hey, could you answer me how can I make my monitor work??? Last edited by rowenalaw; 06-08-2014 at 12:46 PM.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

06-03-2014, 03:25 PM	#1
JamesH Senior Member Join Date: Jan 2012 Posts: 1,523	Hi, I looks like the firmware upgrade is not working. To upgrade the firmware in your monitor please connect it to a PC with a non Haswell chipset with the latest DisplayLink software installed (Intel Core iX-3xxx and lower / any AMD chipset). After doing this you can then reconnect to your current Haswell system. Thanks, James

06-05-2014, 09:01 AM	#4
JamesH Senior Member Join Date: Jan 2012 Posts: 1,523	Hi, A USB 2.0 cable connected between your monitor and your Haswell PC will also do the trick. Thanks, James