Gigabit Ethernet?!

krogalsky · 11-07-2014, 07:48 PM

I am having similar issue, but my connection is MUCH slower. I'm using the dock with the latest firmware update and using the USB 3.0 cable that came with the unit. If I take the Ethernet cable and plug directly into my computer I can get 60 MegBPS download, but if I plug it into the dock I can't get much over 9 MegBPS. I've posted about this several times with no response. Hopefully we can get some help on this.

parki · 11-09-2014, 10:15 PM

Am now at a new desk: new cable, port etc... still only getting 100 meg. Sigh.

Wim · 11-10-2014, 02:58 PM

I've looked at the logs from jewfrey22, and these show that the the Ethernet port is auto-negotiating to 100Mbit. The software or driver has nothing to do with the autoneg and just reads the autoneg value returned by the hardware, so I suspect this is a hardware fault.

If we really could not autoneg to 1Gbps, there would be more posts about the problem.

Wim

parki · 11-10-2014, 09:25 PM

Ahh, now that's interesting. Exactly what mine is doing... even though it's definitely a Gigabit network. Will report this to our network guys and see if we can work it out.

Thanks!

Splitty · 02-19-2015, 01:15 AM

Same exact issue with me. I have the latest drivers installed 7.7M4 released today and I'm still stuck at 100mbps. I use the dynadock on two different computers. Both are stuck at 100mbps. When I plug the Ethernet cable directly into either computer it works beautifully at full gigabit speeds, maxing out my NAS at ~70mbps on file transfers. When I switch back to the dynadock it's back to 100mbps.

When I go into adapter configuration and force the dynadock to 1gbps, it won't connect at all and I have to go back to auto negotiate.

I have tried multiple Ethernet cables, multiple USB 3.0 cables, and every USB 3.0 port available on each machine and multiple versions of the drivers available on this website and I can't get the damn thing to work.

Any help would be greatly appreciated.

Wim · 02-23-2015, 04:22 PM

Quote:

Originally Posted by Splitty

Same exact issue with me. I have the latest drivers installed 7.7M4 released today and I'm still stuck at 100mbps. I use the dynadock on two different computers. Both are stuck at 100mbps. When I plug the Ethernet cable directly into either computer it works beautifully at full gigabit speeds, maxing out my NAS at ~70mbps on file transfers. When I switch back to the dynadock it's back to 100mbps.

When I go into adapter configuration and force the dynadock to 1gbps, it won't connect at all and I have to go back to auto negotiate.

I have tried multiple Ethernet cables, multiple USB 3.0 cables, and every USB 3.0 port available on each machine and multiple versions of the drivers available on this website and I can't get the damn thing to work.

Any help would be greatly appreciated.

I think comment #3 is still applicable to you and the Ethernet port on the dock is faulty.

Wim

Splitty · 02-24-2015, 06:24 AM

I got a replacement dock and looks like all is well.

11-07-2014, 07:48 PM	#1
krogalsky Junior Member Join Date: Sep 2014 Posts: 4	I am having similar issue, but my connection is MUCH slower. I'm using the dock with the latest firmware update and using the USB 3.0 cable that came with the unit. If I take the Ethernet cable and plug directly into my computer I can get 60 MegBPS download, but if I plug it into the dock I can't get much over 9 MegBPS. I've posted about this several times with no response. Hopefully we can get some help on this. Last edited by krogalsky; 11-07-2014 at 08:02 PM.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

11-09-2014, 10:15 PM	#2
parki Junior Member Join Date: Nov 2014 Posts: 4	Am now at a new desk: new cable, port etc... still only getting 100 meg. Sigh.

11-10-2014, 02:58 PM	#3
Wim Senior Member Join Date: Feb 2009 Posts: 1,561	I've looked at the logs from jewfrey22, and these show that the the Ethernet port is auto-negotiating to 100Mbit. The software or driver has nothing to do with the autoneg and just reads the autoneg value returned by the hardware, so I suspect this is a hardware fault. If we really could not autoneg to 1Gbps, there would be more posts about the problem. Wim

11-10-2014, 09:25 PM	#4
parki Junior Member Join Date: Nov 2014 Posts: 4	Ahh, now that's interesting. Exactly what mine is doing... even though it's definitely a Gigabit network. Will report this to our network guys and see if we can work it out. Thanks!

02-19-2015, 01:15 AM	#5
Splitty Junior Member Join Date: Feb 2015 Posts: 2	Same exact issue with me. I have the latest drivers installed 7.7M4 released today and I'm still stuck at 100mbps. I use the dynadock on two different computers. Both are stuck at 100mbps. When I plug the Ethernet cable directly into either computer it works beautifully at full gigabit speeds, maxing out my NAS at ~70mbps on file transfers. When I switch back to the dynadock it's back to 100mbps. When I go into adapter configuration and force the dynadock to 1gbps, it won't connect at all and I have to go back to auto negotiate. I have tried multiple Ethernet cables, multiple USB 3.0 cables, and every USB 3.0 port available on each machine and multiple versions of the drivers available on this website and I can't get the damn thing to work. Any help would be greatly appreciated.

02-24-2015, 06:24 AM	#7
Splitty Junior Member Join Date: Feb 2015 Posts: 2	I got a replacement dock and looks like all is well.