Flickering/Freezing display

[pezlin]

Please see my response below.

Originally Posted by JamesH

Hi,

Thanks for posting the video.

I'm going to raise this internally for further investigation but wondered if you'd answer these questions before I do:

Do you always get the corruption shown in it? Or do you need to run through specific steps to get it? i.e. Reboot, log off and on, sleep-resume?
- The corruption starts immediately when connecting the computer and nothing helps to solve it (reboot etc.)

If you have another PC could you try and see if you can reproduce this issue with the same dock and monitors?
- I have tried with a Dell XPS without having this issue so it seems to be related to the Spectre X360.

If you increase the resolution of the Spectre screen do you still see the corruption?
- It doesn't matter what resolution I choose.

If you decrease the resolution of the external monitors do you still see the corruption?
- It doesn't matter what resolution I choose.

From the logs I can see you have a Dell U2410 - can you let me know what the other monitor make and model is?
- The problem is there with just one monitor as well (in this case Dell U2410). It also doesn't matter if it runs through HDMI, Displayport or HDMI->DVI-adapter. The problem is not there if I connect the monitor directly to the laptop.

Many thanks,
James

[pezlin]

Any news on this?

[pezlin]

Have you had a chance to look into this? I have also tried with a Dell display link adapter with the same result.

[JamesH]

Will check on this.

Thanks,
James

[JamesH]

Hi,

Please try the latest graphics driver for your HP notebook available from this link:
http://h20564.www2.hp.com/hpsc/swd/p...&swEnvOid=4192

Also can you let me know if this issue persists after upgrading to v7.9M3?
You can download this from here:
http://www.displaylink.com/downloads/downloads.php

Thanks,
James

[pezlin]

Hi!

I have tested the latest driver for both the laptop and the displaylink adapter without success. I ran the support tool once more so that you have fresh data.

[pezlin]

Any news on this?

[Jay]

I had the same issue where my computer was unusable when hooked up to the dynadock due to flickering. I tried this solution on the hp forum and it actually worked!
" NualaMa 18:21 PM 06 Aug 15 There is a simple fix

Open task manager ...
under file (top left) "Run new task" ...
type msconfig (yes it is hard to type as screen blinks, but it can be done) ...
In the new box that opens (it may be behind the task manager box) go to Service Tab ....
Scroll until you find 2 tasks that need to be stopped ...
(1) Problem Reports and Solution Control Panel Support ....
(2) Windows Error Report Service.... Disable these by unchecking ....
Click Apply ...
Click OK ...
If you are prompted to restart, then restart computer .....

This is the main issue causing the screen to blink . .. Ironic that the items causing the errors are the solutions designed to report errors to microsoft"

[pezlin]

Originally Posted by Jay

I had the same issue where my computer was unusable when hooked up to the dynadock due to flickering. I tried this solution on the hp forum and it actually worked!
" NualaMa 18:21 PM 06 Aug 15 There is a simple fix

Open task manager ...
under file (top left) "Run new task" ...
type msconfig (yes it is hard to type as screen blinks, but it can be done) ...
In the new box that opens (it may be behind the task manager box) go to Service Tab ....
Scroll until you find 2 tasks that need to be stopped ...
(1) Problem Reports and Solution Control Panel Support ....
(2) Windows Error Report Service.... Disable these by unchecking ....
Click Apply ...
Click OK ...
If you are prompted to restart, then restart computer .....

This is the main issue causing the screen to blink . .. Ironic that the items causing the errors are the solutions designed to report errors to microsoft"

I have no problem with the laptop screen, only with the external screen. Was it the same for you?