Displaylink ceases to work in 10.13.4

Pbowater · 10-08-2018, 10:15 AM

The last thing from Alban was:

The main item left to address on Mojave is some 2018 model with a fix having to be validated before distribution.

So basically, they are waiting for Apple or someone to approve their fix, and it will be released.

esalaza · 10-09-2018, 10:24 PM

It works now for me!

After uninstalling the old driver, rebooting, installing the new 5.0 one and rebooting again, on my MacBook Pro (Retina, 15-inch, Mid 2014) with Mojave 10.14 (Targus USB3.0 DV2K Dock w Power + Three monitors), the monitors got signal but remained blank.

I got them working doing this: System Preferences -> Some system software was blocked from loading -> Allow -> DisplayLink Corp.

warlockuk · 10-11-2018, 08:12 AM

Annoyingly this (4.3, haven't tried 4.3.1 yet) driver gets worse. Plugged in this morning and had the airplay workaround just going nuts. Wouldn't detect the display but would just keep the airplay button clicked and waiting. Couldn't close or anything, couldn't shut down properly. Had to give it the middle finger of justice on the power switch.

It's not like I needed any of my workflow open or anything

Any closer to fixing it on 10.13.6?

RainbowShooter · 10-11-2018, 03:38 PM

An update after using 5.0 for a while on 10.14

I have noticed that whilst I get picture etc, the screen is extremely laggy (motion of the mouse, dragging windows etc) especially when compared to the last working version earlier in the year, hopefully, this is something that can be improved.

SabRhund · 10-12-2018, 01:01 PM

I am running a MacBook Pro (15-inch, 2017), fresh install of Mojave. Like some other users here, after following the steps below, I still wasn't getting any functionality.

1. Install Mojave.
2. Restart.
3. Download 5.0 Drivers.
4. Run UNINSTALL package from the 5.0 drivers.
5. Restart.
6. Install 5.0
7. Restart.

I did this a few times, and nothing. I read a few pages back, in case I missed something, and sure enough, another user had reported that checking System Preferences > Security & Privacy > General revealed that parts of the install from DisplayLink were blocked by the security pane. Clicking 'allow' told me I needed another restart. After that restart, everything has returned to it's original functionality, and Im hoping that these last 9 months are a distant memory.

Roisin · 10-18-2018, 03:49 PM

Quote:

Originally Posted by SabRhund

I am running a MacBook Pro (15-inch, 2017), fresh install of Mojave. Like some other users here, after following the steps below, I still wasn't getting any functionality.

1. Install Mojave.
2. Restart.
3. Download 5.0 Drivers.
4. Run UNINSTALL package from the 5.0 drivers.
5. Restart.
6. Install 5.0
7. Restart.

I did this a few times, and nothing. I read a few pages back, in case I missed something, and sure enough, another user had reported that checking System Preferences > Security & Privacy > General revealed that parts of the install from DisplayLink were blocked by the security pane. Clicking 'allow' told me I needed another restart. After that restart, everything has returned to it's original functionality, and Im hoping that these last 9 months are a distant memory.

Same - except when I go to privacy & security > general, I can't see anything apart from 'a login password has been set for this user...' and ' allow apps downloaded from...'

Anyone have any idea why I may be missing the 'allow' function?

movdqa · 11-06-2018, 02:46 PM

Quote:

Originally Posted by Roisin

Same - except when I go to privacy & security > general, I can't see anything apart from 'a login password has been set for this user...' and ' allow apps downloaded from...'

Anyone have any idea why I may be missing the 'allow' function?

It should only be there if there's something to Allow. The FAQ indicates that it's only there for 30 minutes after driver install so you may need to do that shortly after installation. It might also work if you go to the Privacy tab and Allow it to control your computer. I haven't been able to get this stuff working outside of mirror mode but I'm on 4.3.1 and 10.13.6.

JOEEDS · 01-01-2019, 04:57 PM

Quote:

Originally Posted by Roisin

Same - except when I go to privacy & security > general, I can't see anything apart from 'a login password has been set for this user...' and ' allow apps downloaded from...'

Anyone have any idea why I may be missing the 'allow' function?

1. Install Mojave.
2. Restart.
3. Download 5.0 Drivers.
4. Run UNINSTALL package from the 5.0 drivers.
5. Restart.
6. Install 5.0
7. Restart.

After doing these steps I am finally back to 3 displays

justaskingaquestion · 01-11-2019, 02:44 PM

Just wanted to say thanks for getting this all working again! I finally (hesitantly) upgraded to Mojave after reading that the newest DisplayLink version 5.0 should fix all the problems, and it does!

No more hanging out on an outdated OS just to be able to use my external monitor!

I honestly thought this was just going to languish in "oh well that sucks" or "here's a hack workaround" land forever, but you guys came through!

raj.shah7372@gmail.com · 02-12-2019, 03:55 AM

hello guys, I have Macbook 12-inch Early 2015 model with 1 USB-C port. What adapter do i need to purchase if i want to connect 2 external monitors ?

Thanks in advance.

10-11-2018, 08:12 AM	#3
warlockuk Junior Member Join Date: Aug 2018 Posts: 27	Annoyingly this (4.3, haven't tried 4.3.1 yet) driver gets worse. Plugged in this morning and had the airplay workaround just going nuts. Wouldn't detect the display but would just keep the airplay button clicked and waiting. Couldn't close or anything, couldn't shut down properly. Had to give it the middle finger of justice on the power switch. It's not like I needed any of my workflow open or anything Any closer to fixing it on 10.13.6? Last edited by warlockuk; 10-11-2018 at 08:15 AM.

10-12-2018, 01:01 PM	#5
SabRhund Junior Member Join Date: Apr 2018 Posts: 1	Finally working! I am running a MacBook Pro (15-inch, 2017), fresh install of Mojave. Like some other users here, after following the steps below, I still wasn't getting any functionality. 1. Install Mojave. 2. Restart. 3. Download 5.0 Drivers. 4. Run UNINSTALL package from the 5.0 drivers. 5. Restart. 6. Install 5.0 7. Restart. I did this a few times, and nothing. I read a few pages back, in case I missed something, and sure enough, another user had reported that checking System Preferences > Security & Privacy > General revealed that parts of the install from DisplayLink were blocked by the security pane. Clicking 'allow' told me I needed another restart. After that restart, everything has returned to it's original functionality, and Im hoping that these last 9 months are a distant memory.

01-11-2019, 02:44 PM	#9
justaskingaquestion Junior Member Join Date: Jun 2018 Posts: 2	Thanks! Just wanted to say thanks for getting this all working again! I finally (hesitantly) upgraded to Mojave after reading that the newest DisplayLink version 5.0 should fix all the problems, and it does! No more hanging out on an outdated OS just to be able to use my external monitor! I honestly thought this was just going to languish in "oh well that sucks" or "here's a hack workaround" land forever, but you guys came through!

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

10-08-2018, 10:15 AM	#1
Pbowater Junior Member Join Date: Jun 2018 Posts: 17	The last thing from Alban was: The main item left to address on Mojave is some 2018 model with a fix having to be validated before distribution. So basically, they are waiting for Apple or someone to approve their fix, and it will be released.

10-09-2018, 10:24 PM	#2
esalaza Junior Member Join Date: Oct 2018 Posts: 1	It works now for me! After uninstalling the old driver, rebooting, installing the new 5.0 one and rebooting again, on my MacBook Pro (Retina, 15-inch, Mid 2014) with Mojave 10.14 (Targus USB3.0 DV2K Dock w Power + Three monitors), the monitors got signal but remained blank. I got them working doing this: System Preferences -> Some system software was blocked from loading -> Allow -> DisplayLink Corp.

10-11-2018, 03:38 PM	#4
RainbowShooter Junior Member Join Date: May 2018 Posts: 6	An update after using 5.0 for a while on 10.14 I have noticed that whilst I get picture etc, the screen is extremely laggy (motion of the mouse, dragging windows etc) especially when compared to the last working version earlier in the year, hopefully, this is something that can be improved.

02-12-2019, 03:55 AM	#10
raj.shah7372@gmail.com Junior Member Join Date: Feb 2019 Posts: 1	hello guys, I have Macbook 12-inch Early 2015 model with 1 USB-C port. What adapter do i need to purchase if i want to connect 2 external monitors ? Thanks in advance.