![]() |
|
|
#1 |
|
Junior Member
Join Date: Jan 2014
Posts: 6
|
Hi All,
I am seeing a similar problem to an earlier poster, but instead of a disconnect every 5 seconds, my video reset/disconnect is every few minutes. Sony Duo 13 - Running Windows 8.1 - Intel Video Card (uninstalled, updated, no change) - Running all the latest video and DisplayLink drivers - Disabled USB Hub power saving (In Device Settings) The Asus MB168+ works fine on my Windows 8 Desktop, but not on my Sony Duo 13. The laptop comes with two USB 3.0 ports and both experience the same problem. Running the DisplayLink Support Tool: Pass: Basic mode support Pass: Device attached Pass: Device started correctly Pass: Graphics driver date Pass: WEI is above recommended 3 Pass: No Other USB graphics software installed I enabled the Advanced Logging and now have a Zip diagnostic file, obtained while I recreated the problem. Who/how should I send the Zip file to? Thank! |
|
|
|
|
|
#2 |
|
Senior Member
Join Date: Jan 2012
Posts: 1,523
|
Hi,
Please attach the tool to your reply - see Additional Options underneath the Message field for the Manage Attachments button. Thanks, James |
|
|
|
|
|
#3 |
|
Junior Member
Join Date: Jan 2014
Posts: 6
|
Thanks James, as requested.
|
|
|
|
|
|
#4 |
|
Junior Member
Join Date: Jan 2014
Posts: 6
|
Hi James,
Any thoughts to suggestions? I appreciate that you are limited by the USB hardware manufacturer and Microsoft 8.1 drivers. As it stands the Asus MB168+ is no good, so I see two options: 1. Send MB168+ it back to supplier. 2. Downgrade to Windows 8 Right now option 2 is my preferred plan, but I guess that this may not be 100% of having a working laptop with the MB168+, but all signs show Windows 8 and displaylink is a lot more stable. Thanks! |
|
|
|
|
|
#5 |
|
Senior Member
Join Date: Jan 2012
Posts: 1,523
|
Hi,
Just looking at this now. Thanks, James |
|
|
|
|
|
#6 |
|
Senior Member
Join Date: Jan 2012
Posts: 1,523
|
|
|
|
|
|
|
#7 |
|
Junior Member
Join Date: Jan 2014
Posts: 6
|
Hi James,
Thanks for the follow-up. I uninstalled the most recent drivers and installed v7.4 M4 as suggested. Unfortunately the problem is not fixed. I have attached the new diagnostic files. Thanks! |
|
|
|
|
|
#8 |
|
Junior Member
Join Date: Jan 2014
Posts: 6
|
Ok, downgraded via clean Windows 8 install. Happy to say display/drivers working fine. I will avoid Windows 8.1 until I know that the drivers are working.
|
|
|
|
|
|
#9 |
|
Junior Member
Join Date: Feb 2014
Posts: 12
|
I'm having the same issue on my Sony VAIO Multi-Flip 13A. I've sent a diagnostic file to the e-mail address (no response yet, but I only sent it this morning). The problem most commonly occurs when opening/closing/minimising/switching/maximising applications, or when moving the cursor to the other screen.
Based on what I'm seeing, this is clearly an instability in the DisplayLink software itself. Downgrading to Windows 8 isn't really an option for me, so I'm stuck with what amounts to an expensive, shiny brick until you guys sort out the software. |
|
|
|
|
|
#10 |
|
Junior Member
Join Date: Feb 2014
Posts: 12
|
Quick note - tried 7.4 M4 -made no difference, same problem.
|
|
|
|
![]() |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|