Trouble with DL and Targus Docking station

luiset83 · 04-29-2013, 11:23 PM

I posted this verbatim from another thread, but I believe the approach will work for you:

The only troubleshooting step I can think of is to remove any old/stale USB devices and force Windows to re-detect them after an unplug/reboot/replug ... You may do that with USBDeview: http://www.nirsoft.net/utils/usb_devices_view.html

Sometimes when I install a particular Windows Update or install a new DisplayLink driver, the previous USB drivers/detection logic will break because of stale/conflicting devices. When this happens, I would not be able to get any screen output, but perhaps network/audio from the hub. Try getting rid of (removing) the stale/old USB devices, especially all the ones relating to the DisplayLink hub. Next, reboot the PC. Finally, re-plug the hub. You should see USB detection happen for all the DisplayLink pieces again and hopefully your problem will be fixed.

04-29-2013, 11:23 PM	#2
luiset83 Member Join Date: Feb 2012 Posts: 48	I posted this verbatim from another thread, but I believe the approach will work for you: The only troubleshooting step I can think of is to remove any old/stale USB devices and force Windows to re-detect them after an unplug/reboot/replug ... You may do that with USBDeview: http://www.nirsoft.net/utils/usb_devices_view.html Sometimes when I install a particular Windows Update or install a new DisplayLink driver, the previous USB drivers/detection logic will break because of stale/conflicting devices. When this happens, I would not be able to get any screen output, but perhaps network/audio from the hub. Try getting rid of (removing) the stale/old USB devices, especially all the ones relating to the DisplayLink hub. Next, reboot the PC. Finally, re-plug the hub. You should see USB detection happen for all the DisplayLink pieces again and hopefully your problem will be fixed.