Windows 10 - DisplayLink Software Crash and Screens stop working

AlbanRampon · 06-02-2016, 02:18 PM

Thank you for the replies to the questions.
For switching to USB2, you can use a USB2 cable instead of USB3.
If you don't have any, there is a trick which can work: slowly push the plug in the slot. It will first make contact with the USB2 pins. When contact is done keep it this way. When your screens are up, you can push it all the way in: USB allows downgrading the link, not upgrading it so if it's established in USB2, it will not go to USB3.

Are all your machines having issues Intel Skylakes?

Kirilllv · 06-07-2016, 10:42 AM

Good news everyone! Everything works good with USB 2.0 cable. Thanks for the help.

06-02-2016, 02:18 PM	#1
AlbanRampon Senior Member Join Date: Sep 2015 Posts: 1,685	Thank you for the replies to the questions. For switching to USB2, you can use a USB2 cable instead of USB3. If you don't have any, there is a trick which can work: slowly push the plug in the slot. It will first make contact with the USB2 pins. When contact is done keep it this way. When your screens are up, you can push it all the way in: USB allows downgrading the link, not upgrading it so if it's established in USB2, it will not go to USB3. Are all your machines having issues Intel Skylakes? __________________ Alban Rampon Senior product manager, universal docking stations and accessories Where to download the latest DisplayLink drivers How to clean up a corrupted installation How to report issues to DisplayLink for a speedy resolution

06-07-2016, 10:42 AM	#2
Kirilllv Junior Member Join Date: May 2016 Posts: 4	Good news everyone! Everything works good with USB 2.0 cable. Thanks for the help.