11-13-2020, 11:24 PM | #1 |
Junior Member
Join Date: Nov 2020
Posts: 3
|
Issues after Big Sur
After upgrading macOS to Big Sur I noticed my monitor using the Displaylink adapter was no longer detected. I then proceed to upgrade the driver to Release: 1.1.
After installing the upgraded driver and a reboot the monitor still did not get detected. Then I went under applications in finder and opened the Display Link Application and then it works. But if I restart my Mac Mini I have to go through the application process again and reopen it and reconfigure the monitor settings. Also, I noticed when it is working the monitor using the Displaylink does not have an option to enable night shift. What gives? Any recommendations? Thanks! |
11-16-2020, 04:07 AM | #2 |
Junior Member
Join Date: Nov 2020
Posts: 2
|
I am also having issues with Big Sur: My Dual 4k USB-C Hub with Power Delivery is failing to deliver anything to my external monitors (Dell); they just go to sleep.
I am on MacOS 11.0.1 The hub is working with my other macbooks, so I know it's this exact machine that's the issue and not my monitors or cables etc. |
11-16-2020, 04:48 AM | #3 | |
Junior Member
Join Date: Nov 2020
Posts: 2
|
Quote:
I also seem to have faulty USB-C inputs on this macbook which probably didn't help... |
|
11-16-2020, 11:05 AM | #4 | |
Super Moderator
Join Date: Jan 2015
Posts: 439
|
Quote:
To the best of my knowledge, macOS 'Night Shift' is not supported on a DisplayLink-attached display. |
|
11-16-2020, 03:10 PM | #5 |
Junior Member
Join Date: Mar 2019
Posts: 2
|
Still having Display Issues after Big Sur
I updated to Big Sur yesterday. Today, I downloaded the Displaylink update 1.1 that was dated in August. I have allowed my screen recording and my accessibility privacy settings, yet my DL system is not detecting my external monitors. These monitors worked just fine with the previous software, before Big Sur. I've read the forums and see others have had issues in the past day or so. I've followed those but still have the same issue.
|
11-18-2020, 12:41 PM | #6 | |
Junior Member
Join Date: Nov 2020
Posts: 3
|
Quote:
|
|
11-19-2020, 06:23 PM | #7 |
Junior Member
Join Date: Nov 2020
Posts: 3
|
So, I triple checked and I do have the launch the application automatically after logging in enabled. I waited about 3-4 minutes and Displaylink booted and my third monitor connected to the Displaylink turned on. So I guess I just need to be patient and wait a few minutes. This did not occur on the previous driver or MacOS.
|
11-23-2020, 02:28 AM | #8 |
Junior Member
Join Date: Nov 2020
Posts: 1
|
Night Shift??
Why can I not enable night shift on my external monitors?? Using Macbook Pro and two Acer H236H monitors.
I've tried software updates, rebooting, new cables, 3rd party software such as flux. No luck. What gives here? Blue light filtering is 100% a requirement. I will need to either get it resolved or return and go through another provider. |
11-23-2020, 11:56 AM | #9 | |
DisplayLink Tech Support
Join Date: Apr 2020
Posts: 461
|
Quote:
Unfortunately night light is currently not supported with DisplayLink drivers, we are working on delivering this feature however it is unavailable yet. Best regards, Katarzyna
__________________
Katarzyna Czaja DisplayLink Check DisplayLink powered products here. Basic troubleshooting FAQs: |
|
11-27-2020, 01:37 PM | #10 |
Junior Member
Join Date: Nov 2020
Posts: 2
|
So are you saying that the Asus Zendisplay won't work with my new macbook air that came with Big Sur installed?
|
|
|