Go Back   DisplayLink Forum > DisplayLink Graphics Technology > Linux and Open Source
Register FAQ Calendar Today's Posts Search

 
 
Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
Old 12-01-2020, 11:50 PM   #11
RobstaRobotard
Junior Member
 
Join Date: Mar 2020
Posts: 11
Default Working on 5.9.10

With a lot of help from SicklCodes I've finally got my Displaylink working under 5.9.10...

I had previously followed the patch from post 2, but this did not appear to work... Among trying lots of different fixes, it seems that a patch from SickCodes' repo seemed to bring it all together...

git clone https://github.com/sickcodes/evdi.git
cd evdi
git checkout -f master
make
sudo make install

It would be great if this could be included with the current DisplayLink offering

It also seems as though the displaylink-driver.service was not starting automatically., but was found to be present from typing 'systemctl status display' and tapping tab twice (without hitting enter).

You can then test whether it will start with 'sudo systemctl start displaylink-driver.service'

This worked for me to bring my additional 2 displays (1xHDMI and 1xDVI) from my DisplayLink adapter... I also had the HDMI straight from my Ryzen 7 laptop (with Nvidia MX350) working in parallel with the DVI from the DisplayLink alongside the laptop screen...
RobstaRobotard is offline   Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 04:36 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2026, vBulletin Solutions, Inc.