Does DL driver work with macOS latest update

pjl · 04-27-2021, 06:42 PM

I confirm the following configuration works including clamshell mode. I have three monitors - 2 x 24" 1080p via D6000, 1 x 32" 1440p via Anker USB C hub

MacBook Ar (M1, 2020)
Big Sur 11.3
DisplayLink Manager 1.3.0 (build 56.111)
Anker USB C Hub, PowerExpand 8-in-1
Dell D6000

Below is how I connect them together.

MacBook Air =(via TB4 port)=> Anker with PD adapter, 1 x 1440p monitor, ethernet =(via USB C data port)=> D6000 with 2 x 1080p monitors

I hope this helps.

04-27-2021, 06:42 PM	#10
pjl Junior Member Join Date: Apr 2021 Posts: 6	I confirm the following configuration works including clamshell mode. I have three monitors - 2 x 24" 1080p via D6000, 1 x 32" 1440p via Anker USB C hub MacBook Ar (M1, 2020) Big Sur 11.3 DisplayLink Manager 1.3.0 (build 56.111) Anker USB C Hub, PowerExpand 8-in-1 Dell D6000 Below is how I connect them together. MacBook Air =(via TB4 port)=> Anker with PD adapter, 1 x 1440p monitor, ethernet =(via USB C data port)=> D6000 with 2 x 1080p monitors I hope this helps. Last edited by pjl; 04-27-2021 at 06:44 PM.