Bad Pool Header

[Cylence]

Hi,

ive installed the newest driver for my windows vista 32 bit system with radeon hd 5750 and Mimo USB Monitor, since that i had everyday one blue screen with bad pool header, somedays more than once...now i ve reinstalled the previous version and its running without problems since that...
My system does have also one xbox360 wireless usb receiver,
one logitech wireless usb mouse,
one microsoft arc wireless usb mouse,
one nostromo n52te gaming keypad,
one logitech wireless usb keyboard,
and at least a soundgraph iMon Display and Remote Control, also connected via usb.
The System is:
Intel P4 DUal Core 2.93GHz
4Gb Ram
8 Harddrives 6 connected on mainboard, 2 connecte via PCI Sata controller.
one dvd drive
4 Monitors are connected:
one FullHD LG 42" with HDMI,
one 19" LG 1440*900 via dvi,
one LG 32" 1360*768 connected via dvi(mostly deactivated)
and the Mimo usb monitor.
One Soundblaster X-Fi Music is also in the system, i think thats all...
Drivers are for all devices graphics and so, are the newest one available.

I hope this helps you, and can improve the next version.

best regards,

tom

[Cylence]

Hi again,

the newer versions all have the same problem on my system, always bluescreens, not starting device after normal startup and often device not reactivating after hibernate, since 6.0 every version have this errors here, the usb monitor is more and more useless. I dont know what i should do. Can anybody help?

best regards,

tom

[Wim]

Hi

Not sure how this got missed on your first post. Sorry.

Can you post the log files as described here:

http://kb.displaylink.com/269

Should give us information about your system and include the dmp files, which should tell us which driver caused the blue screen.

Wim

[Cylence]

ok cool, thanks. I will make these debugfiles this evening, i am at work now. Ill send it tomorrow.

[Cylence]

Hi,

ive seen one more error with the newest version, when i play a video with Hardwareoverlay renderer on my Screen Nr2 Which is located on top of the displaylink device, the video flickers, and i see a 800x480 pix picture of the displaylink device in the top right corner, and no video on this place.
Ive tried to start the advanced displaylink logging, but when the service is restarted, my device isnt recognized, same like every new start of the system, i always have to disconnect and reconnect the displaylinkdevice.
Only the oldest available version of the drivers are running "without" problems on my system, only the start problem and sometimes device goes black, until i refresh desktop or move the mouse, but there are no more errors, no bluescreens, no video problems on other screens. 5.6 is it i think. all newer drivers have these problems here.

I hope this helps to improve displaylink.

Best regards,

Tom

[Wim]

I see you are using a basic graphics theme in Vista. Could you try switching to an Aero graphics theme and see if this fixes the issue?

Wim

[Cylence]

Hi,

when using HardwareOverlay Renderer Windows automatically deactivates Aero.
But Overlay Renderer is the best Renderer for Video. Aero is also using this Renderer, because of this Aeor is deactivated when a different program uses it. The 5.6 Version does not have any problems with this.
I try this weekend if the same problems occur when i have Aero activated, i dont had time yesterday.

best regards,

tom

[Cylence]

It happens also when Aero is activated. Only 5.6 Driver Version is running without bluescreens and without video problems on other screens.

[Cylence]

When using a newer driver than 5.6 i always get bluescreens, also when the usb monitor is not connected, only driver is installed. very strange. Bluescreen appears not directly after installing or activating the device, but sometimes after some minutes, sometimes after some hours.

[Wim]

Can you talk me through exactly how you enable the HardwareOverlay Renderer so I can try and reproduce this and see what changed in v6.0 software?

Thanks

Wim