Poor Screen Resolution

Simon@gpk.net.au · 10-24-2013, 11:03 PM

I have been using a Display link adaptor and all was ok. Windows installed some updated and now I cannot get the resolution to go above 1440 x 900. My other LCD's are running at 1680 x 1050, and they are all the same LDS's. I updated the driver to version 7.4 but still the same issue. I have run the support tool and attached the file. Any assistance would be a great help.

Wim · 10-25-2013, 10:38 AM

This is correct behaviour. The adapter you have uses the DL-120 or DL-125, which has a maximum resolution of 1400x900. This means 1680x1050 is not supported therefore not offered as a resolution.

You will need an adapter based on the DL-165 or DL-195 to be able to use 1680x1050.

Wim

10-25-2013, 10:38 AM	#2
Wim Senior Member Join Date: Feb 2009 Posts: 1,561	This is correct behaviour. The adapter you have uses the DL-120 or DL-125, which has a maximum resolution of 1400x900. This means 1680x1050 is not supported therefore not offered as a resolution. You will need an adapter based on the DL-165 or DL-195 to be able to use 1680x1050. Wim