2560 x 2160

[Displaylink_User999]

Hello,

I am planning to buy a new montitor (LG 34WK95U-W 34" WUHD) with a resolution of 5120 x 2160 pixels. You mentioned in you answer, that this resolution is "only 33% width increase" and therefore maybe a DisplayLink solution could be used to drive this montior.

Questions:

1. Does the DisplayLink DL-69xx chipset support this resolution (5120 x 2160) through a single DP (DisplayPort) connection ? (i.e. lower resolution than full 5K aka 5120 × 2880 which according to specs would require 2 DP connections)
2. If yes, is this resolution supported @ 60Hz as well ?
3. If the resolution (5120 x 2160) is not supported through a single DP connection, would it be possible by using one DP and one HDMI connection simultaneously ?

Thank you very much for your support !

Best regards

[AlbanRampon]

Originally Posted by Displaylink_User999

Hello,

I am planning to buy a new montitor (LG 34WK95U-W 34" WUHD) with a resolution of 5120 x 2160 pixels. You mentioned in you answer, that this resolution is "only 33% width increase" and therefore maybe a DisplayLink solution could be used to drive this montior.

Questions:

1. Does the DisplayLink DL-69xx chipset support this resolution (5120 x 2160) through a single DP (DisplayPort) connection ? (i.e. lower resolution than full 5K aka 5120 × 2880 which according to specs would require 2 DP connections)
2. If yes, is this resolution supported @ 60Hz as well ?
3. If the resolution (5120 x 2160) is not supported through a single DP connection, would it be possible by using one DP and one HDMI connection simultaneously ?

Thank you very much for your support !

Best regards

Hello,

1. Unfortunately, no. The 5K-width support is limited to tiled-displays with dual-DP link.
3. Yes, I see the display has PBP (page 13-14) for that purpose: side by side without a bezel. Each output would be at 2560x2160 and this is advertised supported by both HDMI and DP inputs on page 25 and 26.

Kind regards,
Alban

[Displaylink_User999]

Hello Alban,

Thank you very much for your quick and concise answer - this helps a lot to decide about the next steps i.e. choosing the right monitor and required connections for the application.

Best regards